Archive

Posts Tagged ‘illness’

4 Wheel Scooters – Mobility

November 18th, 2009 No comments

For the convenience of yourself and others, The 4 wheel scooter should be collapsible so that you can store it easy whether you are at home or on the road. Since you will want to use scooter anywhere, make sure that that it set up to be used in both indoors and out. An adjustable seat with a strong back is key to the comfort that you will need. Also make sure you have some storage place to bring your stuff along.

One of the foremost decisioans you have to make is, What about performance for your 4 wheel scooter? As far as speed goes, you are going to want to make sure that you can get around at a pace that will keep you moving with everyone else outdoors. You will also need to make sure it has a battery life that is long enough for touring. Think about 20 miles between charges.

You may think you still don't need a 4 wheel scooter. After all, you are still mobile. That may be true, but maybe you tire easy. And then you are away from living life to the fullest, the way you always have. Maybe you can't keep up with the crowd like you used to. The crowd wants you along. You want your independence. You want to continue to enjoy your life. You want to still make all your own shopping decisions. If all these things are true, then a scooter will bring it all back to you.

A 4 wheel scooter should have the features that make cruising possible.

The 4 wheel scooter should be collapsible so that you can store it easy whether you are at home or on the road. Since you will want to use scooter anywhere, make sure that that it set up to be used in both indoors and out. An adjustable seat with a strong back is key to the comfort that you will need. Also make sure you have some storage place to bring your stuff along.

Whatever is on your agenda, Shopping, touring, visiting friends and family: nothing should stop you from these activities. Your giddy-up may be gone, but modern technology will keep you on the go.

Handling and turning radius is extremely important. If you are in a tight space in a store, you do not want to be pushing shopping carts out of the way or waiting for someone who is blocking the aisle while they reach for pork rinds on the top shelf. These places are hard enough when you are walking. You do not want to make it any worse when you are on four wheels.

The machine should be sturdy so that it can take the wear and tear of anywhere you drive as well as the wear and tear of being taken in and out of your vehicle.

Want to find out more about 4 Wheel Scooters, then visit James Morley's site on how to choose the best 4 Wheel Scooters for your needs.

Choosing Powerchair Chargers

May 12th, 2009 No comments
by Joan Normski

In 1981, Everest and Jennings owned the North-American power wheelchair market with their 3P model. No, it wasn't because they had a superior, innovative product - in fact, they essentially made no changes to their power wheelchair during the previous decade, where they pronounced going from a wire spoke wheel to a mag wheel as progress. Rather, the reason why Everest and Jennings owned the power wheelchair market was because there was virtually no competition.

Of course, there is no universally correct answer, especially since some power wheelchair models are limited in the type and size of chargers that they accept. However, many higher-end power wheelchairs offer and accept more than one charger option, which can be matched to the consumer's lifestyle.

Invacare soon invested $500,000 - a staggering amount at the time - to develop a "motorized wheelchair," one intended to help dethrone Everest and Jennings as a whole. By 1981, the Invacare Rolls IV power wheelchair was launched, and immediately gained attention. Not only was the Rolls IV dramatically more stylish and durable than the 3P, but the Rolls IV featured such advancements as electronic braking, increasing safety and performance.

Despite their convenience, on-board chargers aren't without drawbacks. Firstly, on-board chargers are typically lower amperage than off-board chargers, as they must be compact to fit within a power wheelchair, resulting in 2.5A to 5A chargers that can take longer to charge 55Ah to 80Ah batteries. Secondly, because an on-board charger requires mounting room, the wheelchair, itself, may be a bit larger than otherwise needed, especially rehab wheelchairs in which large motors, batteries, and electronics already consume so much space. Lastly, when issues arise with on-board chargers, they can be difficult to service and replace since they are integrated within the wheelchair.

Typically folding wheelchair ramps are portable and are detachable. A folding wheelchair ramp will have holes at the top where you can secure them to be used. All ramps in the USA will come with a one year warranty.

Another portable ramp is the multi-fold ramp that also will fold up like a suitcase, the last two folds will auto lock so no need to lock it. So just close and carry away, these ramps also come in aluminium too.

Again another folding ramp is called the bariatric ramp that comes as a multi fold ramp it will attach to the rear of the van and mounts directly to the floor of the van. This is a great utility ramp which can help load and unload wheelchairs to and from the van.

Aluminium is a better choice for folding wheelchair ramps, because of its durability. The cost of making an aluminium ramp is higher than a wooden ramp, but there are no maintenance costs. The most important thing is, that aluminium is a much more cost-effective solution for a folding wheelchair ramp and also much safer than other materials like wood.

About the Author: